Base Information
Name:High-Precision Dual-Axis Inclinometer TINC-2D30
Data download:Click Here
  Product introduction

The high-precision dual-axis inclinometer TINC-2D30 is an intelligent inclinometer sensor developed by Tengcon Technology for structural safety monitoring. It is widely used for measuring and monitoring one-dimensional, two-dimensional, and three-dimensional dynamic inclination of structures such as bridge piers, bridges, bridge towers, buildings, and foundation towers of wind power stations. It features small size, light weight, high precision, convenient and quick use, low requirements on environmental conditions, strong anti-interference capability, and strong resistance to mechanical shock. It can accurately measure both static and dynamic inclination. It comes with mounting holes and a directional reference datum plane for easy installation.

TINC-2D30-3.jpg

Product Specifications

 
 
Parameter Specification
Product Name Dual-Axis Inclinometer
Model TINC-2D30
Sensor Type High-precision MEMS sensor with built-in 32-bit MCU
Measurement Range Dual-axis, ±30°
Minimum Resolution 0.001°
Noise Level 0.004°
Usable Resolution 0.01°
Nonlinearity 0.1%
Temperature Drift 0.001°/°C (typical), 0.004°/°C (maximum)
Communication Interface RS485
Communication Protocol MODBUS RTU
Default Baud Rate 9600, 8, N, 1
Power Supply 10–36 VDC
Power Consumption ≤ 300 mW
Operating Temperature -40°C to +85°C
Operating Humidity 10%–90% RH
Operating Altitude 0–3000 m
Protection Rating IP67
Dimensions Approx. 90 × 65 × 36 mm
Weight Approx. 210 g
Copyright(C)2011 Beijing Tengcon Technology Co.,Ltd. TEL:010-59790086