Base Information
Name:T-JWY-311 Oil Well Angular Displacement Sensor
Data download:Click Here
  Product introduction

 Product Description

The T-JWY-311 angular displacement sensor was developed by Tengcon for oilfield applications. Its current output is linear with respect to the shaft tilt angle, and it measures the rotational position of an object. It can be used for position feedback and angle detection.

It is mainly used to measure the angle of the walking beam of a beam pumping unit relative to the ground plane, from which the displacement of the polished rod (suspension point) is calculated.

It uses imported ICs and is designed in full accordance with demanding environmental and electromagnetic conditions. It adapts to harsh climates and offers strong immunity to interference.

jwy311-1.jpgjwy311-2.jpg

  • Two-wire standard 4–20 mA signal: power and signal are transmitted over the same pair, and the wiring polarity is self-adapting.
  • Built-in third-order low-pass filter: smooth output signal and low noise.
  • High-strength magnetic mounting: convenient and safe to install and remove.
  • Fully sealed, waterproof aluminum housing: suitable for all-weather operation.
  • Flex-resistant cable rated for extreme cold and heat: long service life.
  • Built-in EMC filter circuit: strong immunity to interference.
  • Precision components selected: excellent long-term stability.

Specifications

Item Specification
Measuring range -45° to 45°
Power supply 9–36 VDC (24 VDC recommended)
Output signal 4–20 mA<br>12 mA at horizontal position<br>20 mA at 45°<br>4 mA at -45°
Linearity ≤ 1% F.S.
Repeatability ≤ 0.15% F.S.
Hysteresis ≤ 0.15% F.S.
Output smoothness ≤ 0.05%
Signal bandwidth 10 Hz
Load capability Not less than 700 Ω (at 24 V supply)
Operating temperature -40 °C to +85 °C
Insulation resistance 2000 MΩ
Wiring Two-wire, built-in rectifier bridge, no polarity distinction
Material Aluminum alloy
Ingress protection IP66
Copyright(C)2011 Beijing Tengcon Technology Co.,Ltd. TEL:010-59790086